Who Sells Furman PS-8R II 15 Amp Power Sequencer, Advanced Level Power Conditioning, SMP, EVS, LiFT,Sequence On and Off from Front Panel or Remote Switch
Furman was one of the highest quality brand in market.
Unique to Furman's SMP is its unparalleled clamping voltage, even when tested beyond the grueling specifications of - USA/CIDA's A-1-1 test. While other designs offer clamping voltages that are well above 300VAC peak (far beyond long accepted professional standards), Furman's SMP clamps at 188VAC peak, 133 VAC RMS even when tested with multiple 6000VAC - 3000 Amp surges! LiFT (Linear Filtering Technology). Prior technologies could actually harm audio and video performance more than they help. Under certain conditions, these designs can actually add more than 10 dB of noise to the incoming AC line! Worse still, lost digital data, the need to reboot digital presets, or destroyed digital converters are frequently caused by excessive voltage spikes and AC noise contaminating the equipment ground. Furman's SMP with LiFT takes another approach, ensuring optimal performance through linear filtering and no leakage to ground. E.V.S. (Extreme Voltage Shutdown). Furman's trusted overvoltage circuitry protects against all too frequent accidental connections to 208 or 240VAC by shutting off the incoming power until the overvoltage condition is corrected. Rear Panel BNC Connector. For rear panel illumination, a BNC connector is provided for connection of any standard gooseneck lamp, such as the Furman GN-LED or GN-I (sold seperately). Sequencing. The PS-8R II Power Conditioner/Sequencers is capable of powering up a rack full of equipment in a 3-step delayed sequence. The sequence is reversed for power-down. The sequence can be initiated with either momentary or maintained switches, locally or remotely. A duplex outlet is provided for each delay step. One or more Furman PS-8R II may be installed in remote locations and operated via low-voltage wiring. The PS-8R II includes a rear mounted BNC jack which accepts any standard (12VAC, 0.5A) gooseneck lamp for rear rack illumination, as well as a front panel switch which controls the goosenecks operation.
- Rank: #30332 in Musical Instruments
- Brand: Furman
- Model: PS-8R II
- Released on: 2009-08-01
- Number of items: 1
- Dimensions: 4.25" h x14.50" w x21.75" l,10.00 pounds
- Current rating: 15 ams. Operating Voltage: 90 to 140 VAC
- Over Voltage Shutdown: 140 VAC typical.lSpike Protection Modes: Line to neutral, zero ground leakage
- Spike Clamping Voltage 188 VAC peak at 3,000 Amps, 133 VAC RS. Response time: 1 nanosecond
- Maximum surge current: 6,500 amp. Noise attenuation: 10 dB at 10 kHz, 40 dB at 100 kHz, 100 dB at 10 Mz. Linear attenuation curve from 0.05 - 100 Ohms line impedance
- Construction: Steel chassis, .125" brushed and black anodized aluminum front panel; glass epoxy printed circuit boar. Power consumption: 6 watts
Who Sells Furman PS-8R II 15 Amp Power Sequencer, Advanced Level Power Conditioning, SMP, EVS, LiFT,Sequence On and Off from Front Panel or Remote Switch
No comments:
Post a Comment
Note: Only a member of this blog may post a comment.